Super Mill WT-150
Major improvement of the milling-unit,resulting in higher rigidty
- Innovative milling system "SuperMill" is equipped.
- 7.5/3.7kw 40N·m,High-power,High-torque Milling Motors on Upper and Lower Turrets
- Opposed two-spindle, 2-turret construction!
- Y-axis on Upper turrets ±35mm
- 48tools Number of tool stations
- 24tools Number of rotating tool stations
- Up to 22kW cutting power available for turning shaft-work with synchronized spindles.(Left spindle motor 15/11kW?Right spindle motor 11/7.5kW)
Photos and Videos
Machine Specification
Capacity
| Max. turning diameter/Max. turning length 215mm/580mm | 190mm/400mm |
| Distance between spindle nose | max.750mm/min.200mm |
| Bar capacity | 51mm 42mm(op.φ65mm (op.)L only |
| Chuck size | 6"165mm |
Axis travel
| Slide travel X1/X2 | 157.5/167.5mm |
| Slide travel Z1/Z2/B2 | 465/465/550mm |
| Slide travel Y upper turret(op.) | ±35mm |
Left and Right spindles
| Spindle speed | 5,000min-1 6,000min-1(op.)4,500min-1(op.) |
| Left spindle motor | 15/11kW 75.4/38.6N.m |
| Right spindle motor | 11/7.5kW 75.4/38.6N.m |
Upper turrets
| Number of turrets | 1 |
| Spindle speed | 6,000min-1 3,600min-1 |
| Driven motor power and torque | 7.5/3.7kW 40/16N.m |
| Type of turret head/Number of index positions | Dodecagonal/24 |
| Rotary system/Number of driven-tool stations | Individual rotation/12 |
Lower turret
| Number of turrets | 1 |
| Spindle speed | 6,000min-1 3,600min-1 |
| Driven motor power and torque | 7.5/3.7kW.40N.m |
| Type of turret head/Number of index positions | Dodecagonal/24 |
| Rotary system/Number of driven-tool stations | Individual rotation/12 |
General
| Floor space(L×W×H) | 3,615mm×1,985mm×1,860mm |
| Machine weight | 8,900kg |