btn_back

Spark X

Spark x 2100

Introduction

This is our travelling column machining center solution for extremely heavy stock removal on workpieces with a maximum swing of 2100 mm. The Spark 2100 guarantees excellent performances in terms of dynamics and stock removal on cast iron and steel components. It is a good starting point for 5-axis machining of tough material.

Specifications

The machine is available both in a basic configuration as well as in the multitasking configuration for milling and turning. In the latter case, the table fixed to the base is an added value which gives the necessary stiffness to obtain excellent results even with axisymmetric workpieces with a maximum swing of 2100 mm and loads up to 5000 kg. The access area within the box is particularly big so as to facilitate the work of the operator close to the workpiece.

OPTIONS

Measuring Problems

The 3D measuring proble available on our HMCs is very compact and can be employed  in the hardest working conditions. It is automatjically loaded by the tool magazine where it is housed and its efficient radio transmission system guarantees the work-piece geometrical data to be transmitted fast to the NC.

Facing Head System

It is our application concerning the 5th axis facing head. On the top side of the head it is also available an NC-controlled motorization transferring the movement to the sliding bars. The motorized heads are automatically loaded from the tool magazine.

Turning Head

A head extension for turning internal operations, thanks to which it is possible to reach a 600 mm depth, is applied onto the head with a fast and reliable automatic change. It is also possible to have the automatic tool change directly on the head.

Tool Integrity Control

It is a direct contact tool integrity sensor mounted on the rack tool magazine which allows tools to be controlled in concealed time.

Air filter extractors

It is the aspiration system extracting the fumes generated by the pressurized coolant. The aspiration occurs inside the HMC box and it is extremely important to protect the working area but mainly the operator's health.