btn_back

Spark TI / spark-TI

Spark Ti 2600

Introduction

The Spark Ti 2600 is a machining center with inverted "T" morphology in order to maximize the stock removal on large structures in titanium alloy for the aeronautic sector. The Spark Ti 2600 is the solution which simultaneously guarantees maximum dynamic stiffness and high vibration damping: these are indispensable features which rank our machining center as undisputed leader in its category.

Specifications

As well as extreme performances, the Spark Ti 2600 guarantees a good configuration flexibility in order to offer the customer personalized solutions. It can be equipped with either an automatic pallet changing device or a transpallet system able to manage up to 5 component-carrier tables or else with a single-level robot car for an FMS solution.

Photos and Videos

OPTIONS

Measuring Problems

The 3D measuring proble available on our HMCs is very compact and can be employed  in the hardest working conditions. It is automatjically loaded by the tool magazine where it is housed and its efficient radio transmission system guarantees the work-piece geometrical data to be transmitted fast to the NC.

Laser Tool Presetting

The control unit is firmly fixed onto the table and it moves horizontally with it.The sliding covers fully protect the sensor since their shape prevents the chips from accumulating during machining operations. All the HMC movements are controlled by the NC.

Facing Head System

It is our application concerning the 5th axis facing head. On the top side of the head it is also available an NC-controlled motorization transferring the movement to the sliding bars. The motorized heads are automatically loaded from the tool magazine.

Tool Integrity Control

It is a direct contact tool integrity sensor mounted on the rack tool magazine which allows tools to be controlled in concealed time.

Air filter extractors

It is the aspiration system extracting the fumes generated by the pressurized coolant. The aspiration occurs inside the HMC box and it is extremely important to protect the working area but mainly the operator's health.